Crash systems
Sand bed
This mobile platform is designed to perform lateral dynamic rollovers into a sand bed. The tripping height as well as the platform’s coating can be customized. This platform is also
21 March, 2025
March 21, 2025
Crash systems
Corkscrew rollover
The corkscrew rollover test is used to examine various parameters of a test vehicle before, during and after the rollover phase. The entire corkscrew test is usually divided into 3
21 March, 2025
Crash systems
Embankment rollover
The overall design of the embankment rollover is completely based on the needs of our customers as well as the potential of the current test situation on site. Our experienced
21 March, 2025
Crash systems
Rollover
For the execution of rollover tests, ERNST offers the necessary equipment to fully cover this complex test area. In this segment as well, our customers benefit from in-house production, as
21 March, 2025
Crash systems
FMVSS 208 Rollover
The rollover platform is used to conduct lateral rollovers, according to test regulation FMVSS 208. With the pivoting platform the vehicle can be easily set up and brought into the
21 March, 2025
Crash systems
Static rollover
The static rollover is used to check the test vehicle for leaking fluids from the battery or fuel tank after the crash and to document the amount. The overall structure
21 March, 2025
Crash systems
Small overlap
The small overlap barrier is used to test the vehicle structure according to the Small Overlap IIHS test regulation. The steel structure is designed for a crash load up to
21 March, 2025
Crash systems
RCAR Bumper
The RCAR Bumper is used to perform low-speed crash tests at up to 10 kph impact speed and simulates vehicle damages in the front and rear areas. Bumpers are often
21 March, 2025
Crash systems
RCAR 10 degrees
This barrier is designed for RCAR 10 degree frontal impact and is used to perform tests to evaluate the vehicle structure after a 15 kph impact on the barrier, with
21 March, 2025
Crash systems
Pole equipment
The pile makes it possible to conduct pile tests in accordance with current regulations. The pile is dimensioned according to customer requirements and can be easily replaced at any time.
21 March, 2025
